System brand: SALTO Integration name: Data on Card and Wirefree Access Control Software version: v184.108.40.206 Interface developed by: Gallagher Gallagher software versions interfaced to: v5.21, 6.01, 6.10, 7.00 Available and supported: Worldwide Industry applications: All SALTO offline readers, when...
LONG-RANGE READERS: NEDAP
Product Category: Long-range Readers System brand: Nedap Product name: Nedap Automatic Vehicle Identification (AVI) Interface developed by: Gallagher Gallagher software versions interfaced to: v5.02, 5.10, 5.20, 5.2, 6.01, 6.10, 7.00 Available and supported: Worldwide Industry applications: All Nedap’s Gallagher-enabled,...
CAR PARK SYSTEM
XP-CPRO5 controller can also be used as the car park controller. Each reader interface point can be used to control an entry/exit point for car park....
The A506HC Hose Assembly is a 6 foot length of 1/8 inch OD stainless steel tubing, rated for 7500 psi. This small diameter tubing is “bendable”, but it is not as flexible as the other hoses. It is recommended for corrosive gases, high temperature transfers and other high pressure applications....
Whenever gases or liquids are introduced into a vessel under pressure, the supply pressure must be greater than the pressure in the vessel to prevent reverse flow back into the supply system. Protection against reverse flow can be obtained by installing a check valve in the supply line. With a...
Removable, open top, cylindrical liners made either of borosilicate glass or PTFE can be furnished to fit most Parr reactors and general purpose vessels. These liners slide into the cylinder and require no additional fittings, but they may not coordinate with some alternate accessories and stirrers. Although they will not...
Internal cooling coils are available for all but the smallest Parr reactors. These coils provide an extremely effective means of removing heat from the vessel to control an exothermic reaction or for cooling the reactor at the end of a test. Since heat is transferred through the relatively thin wall...
Ball Valve Solids Charging Ports A ball valve with a 3/8 inch diameter opening can be installed on any one liter or larger vessel and used in conjunction with a high pressure pipette for injecting slurries under pressure. These are opened or closed with a quarter turn of the handle. Larger...
Show 1 to 5 of 5 (1 page)